« Back to Facilities Management News Home

« Flooring

VCT Flooring: Getting Off to a Good Start

Fort Worth, TX - Vinyl composition tile (VCT) is one of the most common types of hard surface floorings cleaning professionals will encounter.  It is durable, relatively easy to clean, and inexpensive when compared to most other floor types.

However, when working with a new VCT floor, maximizing the floor’s benefits will depend on how well it is cared for from the very start. 

This month’s Powr-Flite Troubleshooter focuses on techniques to keep VCT floors looking their best from the start, helping to save time, energy, costs, and protect the environment all at the same time.

“The first thing to do [with a new VCT floor] is nothing,” says Mike Englund, a cleaning trainer and product manager for Powr-Flite.  “Wait a week to allow the adhesives used to secure the floor ample time to thoroughly dry and harden.”

He then recommends the following:

Scrub: Machine scrub the floor to remove soils and any protective coatings the manufacturer may have applied.

Chemical selection: Consider selecting chemicals from the same manufacturer; often, cleaners, strippers, sealants, and finishes from the same manufacturer are designed to work together as a system.

Seal and finish: VCT floors should be sealed and/or finished to protect the floor.  The number of coats depends on such factors as the customer’s expectations, traffic conditions, budget, climate, etc.

Burnish or buff: Decide whether the floor should be burnished or buffed; this will help determine the type of finish required.

“The automatic scrubber selected to maintain VCT is critical,” says Englund.  “It’s not only a matter of maintaining a quality appearance, but the right machine can help keep costs down and worker morale and productivity up.”

Additionally, the size of the floor area to be maintained is another variable to consider.

“[For instance], a six-foot wide aisle can typically be cleaned effectively with a 20-inch machine.  While you might think a larger machine will get the job done quicker, it may only offer a moderate gain in productivity and unless it is used for other purposes, may not be worth the added cost,” he adds.


The Powr-Flite Troubleshooter addresses some of the most common floor care problems cleaning professionals encounter … and, most importantly, how to tackle them.


About Powr-Flite
Established more than 40 years ago, Powr-Flite manufactures a full line of floor-care equipment and carpet extractors for the professional cleaning industry. Based in Fort Worth, TX, the company has over 20 patented designs and its products are recognized throughout the world for their innovation, durability, quality and performance. Their products are marketed directly to end-use customers as well as through distributors throughout the North America, Europe and the Far East.

Contact FacilitiesNet Editorial Staff »   posted on: 1/24/2014

More From 1/24/2014 on FacilitiesNet