fnPrime


ASHRAE Standard 90.1 Charts a New Course for Energy Efficiency Goals



ASHRAE’s energy standard update gives facility managers new pathways to address emissions, controls and building performance.


By Ronnie Wendt, Contributing Writer  


Key Takeaways:  

  •  ASHRAE is separating energy efficiency from operational carbon goals. Standard 90.1 will continue to establish energy-efficiency requirements, while a separate, aligned publication will help facility managers and building owners pursue operational emissions reductions. 
  • Building controls and system integration are becoming essential to energy savings. Managers can reduce waste by aligning HVAC, ventilation and lighting with occupancy, coordinating building systems and adjusting energy use based on grid conditions. 

  • Benchmarking and data-driven maintenance can guide cost-effective improvements. Utility benchmarking, sub-metering, energy management systems and AI can help managers identify underperforming equipment, prioritize upgrades and verify that building systems operate efficiently. 

For over 50 years, ASHRAE Standard 90.1 has provided a foundation for energy-efficient design of institutional and commercial buildings. As building owners face growing demands to reduce energy consumption and greenhouse gas emissions, ASHRAE has clarified the way the standard will address those priorities. 

Under a new strategic direction for the 2028 and 2031 development cycles, ANSI/ASHRAE/IES Standard 90.1 will focus on energy efficiency and cost-justified energy requirements. The operational carbon provisions are moving into a separate, aligned publication that jurisdictions and organizations can use to go beyond baseline energy efficiency requirements. 

For maintenance and engineering managers, the shift maintains a familiar framework while opening another path for organizations pursuing emissions-reduction goals. 

“90.1 will essentially stay the same,” says Richard Lord, chair of the ASHRAE Standard 90.1 committee. “The base 90.1, the optional standard, which we’re calling an annex, will be published separately.”

Two paths, similar frameworks 

The distinction gives building owners more flexibility. Those seeking minimum energy-efficiency requirements can continue using Standard 90.1, while organizations pursuing operational carbon reductions have access to an additional framework. 

Standard 90.1 will continue to address areas managers already know well, including HVAC, lighting, building envelopes, controls and renewable energy. The separate emissions-focused document will follow a similar structure to reduce the learning curve. 

“90.1 and the annex will look very similar to each other, so facility managers do not have to relearn it,” Lord says. “We had the same committee create it to ensure consistency.” 

The new document zeroes in on emissions associated with facility energy use rather than embodied carbon or other sources of emissions. 

“We really wanted emissions associated with energy — so the power used to operate the building and gas-fired equipment," he says. "It’s not emissions from refrigerants. It’s not emissions from embodied carbon in concrete.” 

That distinction matters because operational emissions are closely tied to the HVAC equipment, controls, lighting and energy sources serving those systems that managers oversee. 

Controls Take Center Stage 

As equipment and building components become more efficient, finding additional savings is more challenging. For example, LEDs have reduced lighting loads, while decades of improvements to insulation and windows mean additional envelope upgrades eventually deliver diminishing returns. Those changes put greater emphasis on the way systems operate together. 

“One thing that’s new is the controls, the management, looking at things as a system,” says Thomas Culp, co-vice chair of the Standard 90.1 committee. “That’s where we hope we can find additional energy savings.” 

Lighting controls offer a straightforward example. Instead of pursuing ever-more-efficient lighting technology, managers can reduce consumption by making sure lights operate only when needed. Similar thinking applies to ventilation. 

“Lighting is pretty much there with LEDs, so the focus on lighting is controls,” Lord says. "‘Let’s turn the lights off, let’s manage them, and if no one is in the room, let’s turn them off.’ We do the same thing too with ventilation. If no one is in the room, why do we ventilate that room?” 

Changing occupancy patterns have made that approach relevant. Hybrid work hours leave offices partially occupied on certain days. This scenario creates opportunities to better align HVAC, ventilation and lighting schedules with actual building use. The broader goal is to stop evaluating equipment in isolation and start examining the way components interact across the building, Lord says.

Beyond the building 

As renewable generation becomes a larger part of the electrical grid, owners and managers might have opportunities to adjust energy consumption based on when electricity is most available. Facilities might reset temperature setpoints, pre-cool buildings or store energy for later use. 

“We’re trying to interface with the grid so that facility managers know what’s going on with the grid,” Lord says. “This means you have a lot more renewable energy and peaky power.” 

Thermal storage and batteries might enable managers to shift energy use to more advantageous times. Buildings also might be able to share resources, such as capturing waste heat from one facility for use by another. 

“We’re trying to think of the building and the grid as a complete system,” Lord says. 

These strategies add another dimension to energy planning. The amount of energy a building uses, when it uses it and how efficiently its systems respond to outside conditions all might be factors in efficiency. 

Cost still matters 

ASHRAE continues to apply cost-effectiveness criteria when developing requirements. The committee evaluates measures across climate zones because an improvement that makes economic sense in one part of the country might deliver a different return elsewhere. 

“It’s very easy to cost-justify some stuff in a very warm climate,” Lord says. “It’s more difficult in a cold climate. But when you look at heating, then heating can be more cost justified.” 

Managers can use energy system and building data to pinpoint beneficial upgrades. 

“If they have an energy management system, it can model a lot of that stuff,” Lord says. “You may have heard of things like digital twins. We’ll make a model of a building, and then we compare it to the meter data. It helps identify problems.” 

Those tools help managers identify systems that are underperforming. Commissioning and maintenance also remain critical because even efficient equipment wastes energy when it does not operate as intended. 

Benchmark before investing 

Maintenance and engineering managers do not need sophisticated digital twins to identify opportunities. Benchmarking utility data can help teams determine where to invest first. 

“They can do Energy Star benchmarking,” Lord says. “That’s where you take meter data and enter it into a database and then compare it to a similar building next door.” 

Sub-metering provides another layer of visibility. Tracking energy consumption by system can alert managers when cooling towers, HVAC systems or other equipment consume more energy than expected. Managers also can track energy performance over time instead of waiting for a utility bill or equipment failure to reveal a problem. Lord compares the process to watching the fuel economy display in a vehicle. 

“It’s like looking at the average miles per gallon in your car,” he says. “You look at that and say, ‘How am I doing?’” 

A more connected future 

ASHRAE is developing digital tools and expanded compliance approaches as Standard 90.1 evolves. The goal is to make the standard easier to understand and apply while giving building professionals multiple ways to demonstrate compliance. 

Energy efficiency now depends on how well building systems, data and controls work together. Controls adjust operations based on occupancy. Energy management systems flag abnormal performance, while sub-meters pinpoint where facilities consume energy. Energy storage shifts loads to more advantageous times, and sophisticated building systems adjust operations as grid conditions change. 

Lord says artificial intelligence (AI) is playing a larger role in analyzing building performance. 

“AI is already showing up in a lot of these systems, and you’d be surprised by what it can find in a building,” Lord says. 

Standard 90.1’s next chapter builds on decades of energy-efficiency improvements while placing greater emphasis on whole-building performance. This standard will help high-performing facilities coordinate systems, analyze data to uncover problems and adjust energy use based on building needs and grid conditions. 

Ronnie Wendt is the owner of In Good Company Communications and a freelance writer specializing in articles for the facilities management, aviation, RV and automotive, meetings and events, security, logistics and business technology industries. 




Contact FacilitiesNet Editorial Staff »

  posted on 11/18/2026   Article Use Policy




Related Topics: