Home of Building Operating Management & Facility Maintenance Decisions
Insider Reports


FacilitiesNet eNewsletter
eNews Best Information Tool For Busy FMs
We will keep you updated with trends, education, strategies, insights & benchmarks to help drive your career & project success.
Sign up for eBook




« Back to Facilities Management News Home

« Fire Safety/Protection

Hardware Targets Fire-Suppression Installations


Greenheck has developed a UL-approved three-sided retaining angle installation method for fire and combination fire smoke dampers. This method is ideal for installations where the damper sleeve is tight up against a wall, floor, or other obstruction with no room for a retaining angle on one side. Greenheck’s installation does not require the use of any firestop material, while other three-sided angle installation methods require fire stop material to be applied to a specified minimum thickness on the side of the damper without the retaining angle. Complying with the minimum thickness requirement without scraping off the fire stop material during installation can be difficult, and makes it complicated for building inspectors to confirm that the required amount of fire stop material has been applied. With Greenheck’s three-sided angle installation method, fasteners are run from inside the damper into the wall opening on the side without the retaining angle. This makes for a faster, cleaner and more cost effective installation.

Contact FacilitiesNet Editorial Staff »   posted on: 1/8/2019


More From 1/8/2019 on FacilitiesNet