The Skills Guide for Facility Managers details 10 must-have traits for those new to the industry
This peer-to-peer networking session will cover best practices for working with young facility professionals
Modified bitumen roofs are a cross between built-up and single ply systems. The membrane consists of a multi-layer sheet of asphalt with polyester or fiberglass reinforcements and plastic or rubber modifiers. They typically are installed as a one-, two-, or three-ply roof system. The most common problems include:
Seam defects. The modified bitumen roofing material is installed in long sections that are 30-35 inches wide. One section is adhered to the next by a lap of several inches. Thermal expansion and contraction, improper application techniques, and stresses can create seam failures or the formation of voids in lapped areas. Workers can correct minor seam failures with adhesives or by reheating the seam.
Punctures. The modified bitumen membrane is susceptible to physical damage from a number of sources, including punctures from tree branches, foot traffic, dropped tools, and mechanical system components. Vibrations from mechanical equipment can even cause mechanical fasteners to back out, puncturing the membrane. Workers can easily patch most punctures.
Blisters. Blisters indication moisture has penetrated the membrane. Correction requires identifying and eliminating the source of the moisture and replacing the impacted membrane areas.
Comprehensive Strategies for Effective Roof Inspections
Common Problems With Built-Up Roof Systems
Common Problems With Single-Ply Roof Systems
Common Problems With Modified Bitumen Roof Systems