Best Information Tool For Busy FMs
We will keep you updated with trends, education, strategies, insights & benchmarks to help drive your career & project success.
- Building Automation
- Ceilings, Furniture & Walls
- Doors & Hardware
- Equipment Rental & Tools
- Energy Efficiency
- Facilities Management
- Grounds Management
- Fire Safety/Protection
- Maintenance & Operations
- Plumbing & Restrooms
- Power & Communication
Common Problems With Metal Roof Systems
OTHER PARTS OF THIS ARTICLEPt. 1: Comprehensive Strategies for Effective Roof InspectionsPt. 2: Common Problems With Built-Up Roof SystemsPt. 3: Common Problems With Single-Ply Roof SystemsPt. 4: Common Problems With Modified Bitumen Roof SystemsPt. 5: This Page
Metal roofs come in two basic categories: structural and architectural. Structural metal roof installations combine the waterproofing layer and the supporting deck. In architectural installations, the two are separate components.
The most common metal roof designs use steel, aluminum or copper. Common problems include:
Corrosion. All types of metal roofs are subject to corrosion from exposure to a combination of water and water-borne pollutants. Protective coatings help to limit the exposure and damage. Any damage to the coating exposes the underlying metal to the elements and accelerates the corrosion process.
Failed fasteners. Metal roof fasteners are subject to a range of forces that can reduce their effectiveness, including corrosion, wind-induced vibrations, and metal fatigue. If a sufficient number of fasteners fail or even loosen, wind can lift the panels and separate them from the roof. Workers should replace any failed or damaged fastener.
Failed seams. Seams on metal roofs can be flush with the roof’s surface, or they can be raised. Any separation of the seam can result in water penetration and increase the risk the wind will lift panels from the roof. Workers must repair all seam deficiencies in order to prevent further damage to the roof.
James Piper, P.E., is a national consultant based in Bowie, Md., with more than 25 years of experience with facilities maintenance and engineering issues.