Complete Fluorescent Lighting Upgrades Before End Of 2013 To Maximize Section 179D Tax Deductions

By Charles R. Goulding and Jennifer Pariante  
OTHER PARTS OF THIS ARTICLEPt. 1: EPAct-created Section 179D Federal Tax Deductions Are Set To Expire In DecemberPt. 2: Tweaked Section 179D, New Section 179F Would Offer Improved Tax Deductions For Energy EfficiencyPt. 3: This PagePt. 4: Update: Alternative Energy Tax Credits And Capturing Missed EPAct Tax Deductions

Anyone contemplating a fluorescent lighting upgrade to earn tax deductions under Section 179D should attempt to do it before the end of 2013. That's because the lighting-only tax deduction will be harder to achieve with a baseline of the ASHRAE 90.1-2004 standard, which could become effective Jan. 1, 2014 if the Senate proposal becomes law.

With HVAC, ASHRAE 90.1-2004 does not vary that much from 90.1-2001, so if the law is extended, the same measures that tend to qualify now will qualify under the standard of 90.1-2004. The HVAC measures that often qualify (subject to modeling) are as follows:

  • Geothermal (ground source heat pumps)
  • High efficiency water source heat pumps
  • Thermal storage
  • High efficiency VRF units in rental apartments/dorms/hotels
  • Centralized HVAC in rental apartments/dorms/hotels
  • Energy recovery ventilation
  • Demand control ventilation
  • VFDs on all major motors and compressors
  • Direct fired heaters in industrial spaces without air conditioning
  • Chillers in buildings smaller than 150,000 square feet
  • VAV (variable air volume devices) in buildings under 75,000 square feet
  • Chilled beams
  • Magnetic bearing chillers
  • Gas-fired chillers combined with electric chillers to peak shave
  • Combined heat and power installations

In addition, industrial space greater than 75,000 square feet with constant volume package units can often qualify for either the $1.20 or $1.80 deduction by installing energy efficient lighting that meets the standards for those deductions.

What's more, under current law, many heated (non-conditioned) warehouse and industrial buildings can meet the threshold for the $1.80-per-square-foot deduction if they have installed energy efficient lighting and perform work on their heating systems and roof. Here's how it works. To qualify for the maximum 179D deduction of $1.80 per square foot, a building must beat ASHRAE 90.1-2001 standards by a specified amount. Efficient lighting by itself may be enough to enable a building to hit that target. An owner can get only a 60 cents-per-square-foot deduction for lighting alone. But if the owner upgrades the roof and heater, those improvements can be grouped with lighting upgrades and will likely qualify for the maximum deduction. There are certain other conditions that must be met, but those are generally not hurdles.

All warehouse or industrial property owners interested in a heater upgrade or roof measure should, if they haven't done so already, install energy efficient lighting at wattage levels low enough to trigger the $1.80-per-square-foot incentive before Dec. 31, 2013. It is particularly important for warehouse or industrial building owners who are preparing for a near term rooftop solar photovoltaic installation that requires roof work to act now. Many non-conditioned warehouse owners are upgrading to LED lighting using the $1.80-per-square-foot deduction for that project.

In addition, many refrigerated warehouse owners are getting tremendous lighting-related energy cost savings from LED lighting and typically qualify for a $1.20-per-square-foot deduction.

Many new building projects that are in the design stage won't complete their projects until after Jan. 1, 2014. Because lighting is usually one of the last items installed, it may make sense to remain flexible on the lighting design and consider a more efficient lighting design if the larger lighting EPAct tax incentive is enacted.

Contact FacilitiesNet Editorial Staff »

  posted on 6/21/2013   Article Use Policy

Related Topics: