Air/water Membrane - DuPont - Facility Management Product Release
DuPont Tyvek Fluid Applied WB+ System fluid applied air/water barriers combine superior air and water barrier and industry-leading vapor permeability into a reformulated fluid-applied membrane for ease of use on most commercial substrates.
"This innovation is exciting for our customers who need longer open times in the field as well as a product that is much easier to spray on the wall," stated Tim Wilson, DuPont North America commercial marketing manager. “Our system approach allows installers to have a fluid applied membrane, a fluid applied flashing and joint compound, along with sealants that are all compatible and install seamlessly together in the field."
DuPont Tyvek Fluid Applied WB+ System offers some of the highest vapor permeability among the competition at 22Perms. Applied by typical spraying equipment, the product is installed in a one-coat lift of 25 mils, thus saving valuable installation time, and providing up to two and a half times as much coverage per gallon as competing products depending on the wall substrate. Additionally, the combination of STPE Technology and high solids content allows DuPont Tyvek Fluid Applied WB+ System to move with the building. This technology helps enable low membrane shrinkage, high elongation, and elastic recovery, unlike other fluid applied materials that shrink during curing and crack over time.
Enhanced durability provides architects, general contractors and Building Envelope Consultants t a DuPont Tyvek Fluid Applied WB+ System that can perform well, in most extreme conditions. Withstanding nine months of UV exposure, the product helps enable flexibility needed in construction schedules. The Fluid Applied system can be installed in temperatures as low as 25 degrees, and since it is moisture cured, can even be installed when precipitation is in the forecast. DuPont backs the DuPont Tyvek Fluid Applied WB+ System with a 10-year limited warranty and employs the Certified Installer Program on the correct installation of products.
DuPont Tyvek Fluid Applied WB+ System helps prevent air and water leakage at the vertical walls of the building envelope, allowing for more sustainable structures through enhanced energy efficiency and can provide protection from mold and mildew. The system holds a shelf-life of 12 months from the time of manufacture and is easily cleaned with mineral spirits and common citrus-based cleaners.
- Paints and Coatings Applications for Long-Term Performance
- Tactics for Successful Surface Prep and Paint Applications
- Paints: The Bottom Line on Surface Preparation
- Art Inspiring New Discussions at London Behavioral Healthcare Facility
- Assessing the Performance of Green Paints
- Avoiding Pitfalls In LEED Certification For Interiors