- Senior Director of Facilities »
- Construction engineer, U.S. Dept. of State »
- ELECTRICIAN »
- Director of Facilities and Fleet Management »
- DIRECTOR OF COLLEGE FACILITIES »
Don’t Overlook Wireless Needs In Building Design
June 9, 2016 - Contact FacilitiesNet Editorial Staff »
Across the board, the most common technology mistake made during building design and planning is the lack of accounting for wireless needs. For a variety of reasons, when owners or architects are envisioning their concept, they overlook wireless systems. As a result, at the end of the job, often even after the building is complete and occupied, they get hit with the additional headache of disrupting tenants to pull cables, install surface-mounted devices, and of course, the additional cost.
Why is this so common a mistake? Traditionally, wireless was used for non-critical applications such as Internet connectivity for staff and guests, and since it's not required by code, the design industry has considered installing at a later time an acceptable solution. The market, however, has changed. By 2015, an estimated 40 to 48 percent of all new nonresidential construction will be green. The demand for higher-efficiency buildings has led to more building systems requiring the use of wireless networks to communicate and monitor end-terminals remotely. Additionally, there have been changes to local codes demanding more reliable public safety radio coverage inside buildings for emergency responders.
Regardless of the facility, it's no longer a matter of if wireless will be required, just a question of whether you want to plan early before you build, or pay a premium later. IT consultants can help facility managers plan, select the best wireless options to meet end-user needs, and stay to up-to-date with local codes (where required). Furthermore, an IT consultant can better develop a realistic wireless budget for the owner and provide the architect-engineer-conduction team with infrastructure requirements, such as pathways, telecom room sizes and locations, power, and cooling, without sacrificing the architect’s vision. Generically speaking, the fee for an IT consultant is insignificant to the overall project cost, and may ultimately save the owner money and headache. Be prepared for what's to come. Overlooking this need early can often cause a major regret later.
This quick read is from Gislene D. Weig, electrical engineer, RCDD, is a senior consultant at PlanNet Consulting. Read more from her about wireless technology.