- Assistant Director of Facilities Operations »
- Maintenance Craftsperson »
- Mechanical Lead A »
- Director of Facilities Management »
- Facilities Coordinator »
5 Tips Can Prevent ADA Problems in Open Offices
OTHER PARTS OF THIS ARTICLEPt. 1: This PagePt. 2: How To Make Sure A Space Is Really ADA Compliant
When the Americans with Disabilities Act (ADA) went into effect 25 years ago, its purpose was to provide to people with disabilities the same rights, opportunities, and protections available to everyone else. And while ADA has certainly been successful overall, compliance challenges still remain. Perhaps paradoxically, the trend to more open office spaces has both exacerbated and eased these challenges. While more traditional closed-office design already was being replaced by more open office settings at the time the law went into effect in 1992, the trend has only accelerated since then, with more space being devoted to collaborative areas and less to personal workspaces.
According to data released in July 2015 by the Centers for Disease Control and Prevention, 53 million adults — or 22 percent of the U.S. population — have some kind of disability. And that number — based on the 2013 Behavioral Risk Factor Surveillance System — did not include hearing disabilities. It included mobility, cognitive, vision, self-care, and independent living limitations.
In general, the move to more open, flexible office layouts has been good for accessibility, say experts. “Open work spaces are much more beneficial and useful from an ADA standpoint,” says Joan Stein, president of Stein Consulting. “Walls, partitions and doors are all potential barriers and also present the greatest opportunities for errors in design and construction.” For example, says Stein, a minimum of 32 inches of clear opening width is required for doorways. Take away the door and the issue goes away. The same goes for the need for maneuvering clearance at a door to enable a wheelchair user to approach and open the door. No door, no need for maneuvering clearance.
But the move to more open work environments hasn’t eliminated ADA compliance issues. That’s why it’s important for facility managers to have a solid grasp of the requirements of the law, and of the issues that can arise in open workplaces. These five points can help facility managers ensure that open offices and other spaces comply with ADA.
1. Know the rules
“The term ‘ADA’ is often used to broadly represent the issue of accessibility,” says Jim Safranek, principal at the Safranek Group, “but in fact the ADA represents a federal statute that has several distinct titles which address the issue of discrimination in a variety of settings. For private businesses, often the two most important titles are Title I, which addresses employment (for businesses with more than 15 employees), and Title III, which addresses public accommodation.”
Under Title I, he explains, employers must offer “qualified individuals with disabilities an equal opportunity to benefit from the full range of employment-related opportunities available to others.” In addition, employers must “make reasonable accommodation to the known physical or mental limitations of otherwise qualified individuals with disabilities, unless it results in undue hardship.”
Under Title III, Safranek continues, businesses must make sure that certain elements commonly used by employees “comply with basic nondiscrimination requirements that prohibit exclusion, segregation, and unequal treatment.”
The distinction between Title I and Title III is important. “For open offices, it often depends upon whether an employer is addressing compliance with Title I and/or Title III of the ADA,” says Safranek. “Where compliance with Title I is the issue, open office environments that use modular furniture components at employee work areas can often be readily adapted to a request for reasonable accommodation by an employee.”
It’s important to remember that ADA isn’t the only set of legal requirements when it comes to accessibility, says Rich Sternadori, education coordinator at the Great Plains ADA Center. For example, there is also the International Building Code. The two “are not exactly harmonized,” Sternadori says, but regardless of that “any architect or designer has to work with both documents.” Beyond these, state and local governments may have their own rules and regulations that also must be adhered to.
While ADA is not a code, ADA standards sometimes reference specific codes. “This means a designer must use the referenced codes to meet the Federal standards” says Sternadori.
2. Be aware of potential ADA problems
Like other experts, Sternadori, who also is an instructor in the Department of Architectural Studies at the University of Missouri – Columbia, says that when there are fewer walls, fewer doors, fewer 90 degree turns, and fewer partitions, it is easier for people with wheelchairs, canes, and walkers to get around.
However, these open spaces have their potential issues as well. “One of the more interesting challenges is space used for collaboration,” says Safranek. These shared spaces can take a variety of forms, from traditional conference rooms to open areas where mobile tables are quickly moved for impromptu meetings. ADA issues may arise with these spaces depending on how they are used. For example, Safranek says, “can employees routinely use a vacant conference room as a makeshift employee lunch room?” ADA considerations are also affected by who has access to the room or space. Are outside vendors allowed to use it? Consultants? Speakers?
“It’s important to understand how the spaces are used and who will be using them, because this will determine whether it is a matter of compliance with Title I or Title III,” Safranek says. “Where the outside public is allowed to access spaces within an office environment — be it a collaboration space or some other space — addressing the ADA requirements from Title III will be paramount.”
Facility managers also want to make sure “barriers aren’t built into the environment,” points out Stein. For example, ensure that “pathways are wide enough.” To check this, facility managers “need to walk around the space with a tape measure or a three-foot-long yardstick” and measure doorways and hallways. “You need to maintain a clear path throughout the space.”
Another point to keep in mind is that it’s not enough to comply with ADA within a space, says Sternadori. Also important are the approach, entry, and exit. Approach focuses on “getting in a door, being able to manipulate a door, whether it’s a pull or a push.” Entry addresses issues such as how high the threshold of the entryway is.
The above-counter outlets and switches used in kitchenettes within employee break areas — common features in open office designs — can pose ADA problems, Safranek says. “These outlets/switches are often accessed by a side approach at the base cabinet/countertop so the maximum distance from the face of the outlet/switch to the furthest obstruction at the face of the base cabinet/countertop is 24 inches. For a variety of reasons — countertop depth, cabinet/drawer hardware, base cabinet depth — the maximum reach range depth of 24 inches is often exceeded.”
Another point to remember, says Stein, is that ADA requirements aren’t limited to people with mobility disabilities. For example, people with visual disabilities may do a cane sweep of their walking path, which wouldn’t detect an object protruding from the wall or something hanging from the ceiling. Facility managers need to make sure that such objects “are out of the path of travel throughout the space.”
Another issue has to do with the use of strobes. While strobes are important to alert people with hearing disabilities, flashing can trigger seizure disorders. One example has to do with where strobes are placed and how they are spaced relative to each other. “Proper designing involves having enough strobes to adequately cover square footage based on decibel levels and visibility,” says Sternadori. “In an open floor plan strobe placement and quantity can be adjusted accordingly: More doors and walls may necessitate more strobes.” ADA standards reference code provisions that set flash rates and decibel levels to try to prevent the onset of most seizure disorders.
Facility managers should also be aware of ADA requirements for accessible means of egress. ADA standards use the International Building Code requirements for accessible means of egress, which focus on how people with disabilities get out of facilities and buildings and which may be affected by the number and configuration of walls and doors, according to Sternadori. Currently, ADA standards and International Building Code require 60 percent of all public entrances to buildings to be accessible. Previously the number was 50 percent. However, Sternadori says, depending on the configuration of interior walls and doors, more than 60 percent of public entrances may need to be accessible. “Simply stated,” he says, “we may need more means of getting persons with disabilities out of structures than are required to get them into the same buildings.”
5 Tips Can Prevent ADA Problems in Open Offices