New Content Updates
Educational Webcast Alerts
Building Products/Technology Notices
Access Exclusive Member Content
Facility Manager Cost Saving/Best Practice Quick Reads RSS Feed
December 20, 2010 -
This is Chris Matt, Managing Editor of Print & E-Media with Maintenance Solutions magazine. Today's tip focuses on lighting with light emitting diodes, or LEDs.
Few technologies have seen as much change — and gotten as much attention — in the last few years as LEDs. Despite the presence of this technology for decades, LEDs recently have entered the lighting market for institutional and commercial buildings and established a foothold faster than any other source available.
The increased lamp life and energy efficiency the technology offers has caught the attention of maintenance and engineering managers, as well as other lighting specifiers, but LEDs do face hurdles and challenges.
The tallest hurdle facing the LED industry is price. LED=based lighting fixtures can cost 1.5-2.5 times more than their traditional counterparts. In some cases, managers might be able to recoup the higher initial cost through energy savings or lower maintenance costs.
Factors such as luminaire spacing, orientation and desired uniformity of the lighting levels create a unique set of criteria for each project. Rarely is the decision to use LEDs a hands-down winner over more traditional technologies. More often, the decision relates to the traditional, or base-case, application to which the LED system is compared.
LEDs have entered the lighting market at break-neck speed, and standard-setting groups have struggled to keep pace with the change. Published works defining standards for comparing life and output of LED systems have not been sufficiently updated.
Without clear definitions and guidance, managers and other specifiers have struggled to get a clear picture regarding LED performance. Many have been burned by early adoption of LEDs. Most designers and engineers believe the best way to select LEDs is through mock-ups and real-world installations.
Specifiers often elect to view a sample to judge first-hand whether the product under consideration will meet their criteria. Subtle variations in color temperature, color rendering and light distribution tend to get lost on cut sheets and photographs. The variety of energy savings potential drastically affects LED products during a life-cycle cost comparison.
power, power management, demand response, grid, electricity, utilities, power generation, utility costs, smart grid