- Senior Director of Facilities »
- Director of Facilities and Fleet Management »
- Construction engineer, U.S. Dept. of State »
- ELECTRICIAN »
- Facilities Director »
Spotlight on BAS for Improved Boiler Maintenance
December 8, 2014 - Contact FacilitiesNet Editorial Staff »
The energy and operating benefits of building automation systems (BAS) are well understood. What is not well understood is that these systems, like all other building systems, require periodic maintenance to ensure they perform as intended. One of the most important maintenance tasks is confirming the system actually operates as intended.
When technicians are in a hurry to solve a problem or do not understand BAS operations, they disconnect actuators, override valve positioners, and take other actions that defeat its efficient operation. The problem is that the temporary solutions never show up on the system monitors and become permanent. The BAS thinks it is doing exactly what it is programmed to do when, in fact, it is not.
Similarly, sensors can go out of calibration. Wear and tear takes its toll on system components, from temperature sensors to valves and actuators. A BAS is not an install-and-forget system. If technicians want to maximize system potential, they must confirm periodically that the information the BAS gathers is correct and accurate and that all functions programmed by the system are carried out as intended.
While retrocommissioning is the most thorough means of accomplishing this goals, periodic spot checks of field conditions compared to system readouts, as well as the observed operation of control devices, will indicate the state of the system.
Maintenance is not glamorous. It does not get mentioned in company press releases the same way that energy-conservation projects do, but if an organization is serious about reducing energy use, effective system maintenance is the place to start. Comprehensive maintenance programs, particularly those that address energy by HVAC systems, provide a rate of return that typical energy conservation projects cannot touch, all while improving system reliability. Link to original article here.