Best Information Tool For Busy FMsWe will keep you updated with trends, education, strategies, insights & benchmarks to help drive your career & project success.
- Building Automation
- Ceilings, Furniture & Walls
- Doors & Hardware
- Elevators
- Equipment Rental & Tools
- Energy Efficiency
- Facilities Management
- Green
- Grounds Management
- Fire Safety/Protection
- Flooring
- HVAC
- Lighting
- Maintenance & Operations
- Plumbing & Restrooms
- Power & Communication
- Roofing
- Security
- Software
ICC And NFPA Approve Code Changes for High-Rise Buildings
OTHER PARTS OF THIS ARTICLEPt. 1: ICC, NFPA Add Code Provisions For Evacuation ElevatorsPt. 2: Smoke, Water Remain Challenges to Evacuation ElevatorsPt. 3: This PagePt. 4: Elevator Operation and Fires: Phase I and Phase II
The International Code Council (ICC) made numerous revisions to its codes to make high-rise buildings safer.
The ICC’s International Building Code includes a requirement for a third stairwell for buildings taller than 420 feet. Exit stairways must be 50 percent wider. Exit stairways and elevator shafts must be hardened in buildings more than 420 feet high. A fire service elevator is required in buildings more than 120 feet high.
The National Fire Protection Association (NFPA) made similar changes in the 2009 version of its code. “Both groups have pretty much adopted the same requirements for the 2009 editions,” says Richard Bukowski, coordinator, codes and standards for the National Institute of Standards and Technology.
For more information on the 23 building and fire code changes, see Facilitiesnet News "ICC Approves New Code Changes Based on Recommendations from NIST World Trade Center Investigation".
ICC, NFPA Add Code Provisions For Evacuation Elevators
Smoke, Water Remain Challenges to Evacuation Elevators
ICC And NFPA Approve Code Changes for High-Rise Buildings
