TRENDING


Insider Reports



QUICK Sign-up

New Content Updates
Educational Webcast Alerts
Building Products/Technology Notices
Access Exclusive Member Content


All fields are required.






BACnet Building Controls from KMC Controls


The BACnet Building Controller (B-BC) is a high-performance, native BACnet direct digital controller. As part of a complete interoperable building automation system, this 16x16 B-BC provides precise monitoring and control of connected points. Integrated into the controller is a BACnet router, web server, and expandable I/O (CAN-A168EIO expansion module) in a native BACnet device.

Web Server Functions

  • Built-in web configuration pages allow web browser to configure I/Os and objects, monitor values and alarms (configuration/monitoring also available through TotalControl), and set-up users and passwords.)
  • Firmware upgradable (without requiring physical access) through the web or Ethernet connection, allowing easy updates
  • Custom web graphical interface (created/published in TotalControl, ver. 1.7 or higher)


Router Functions

  • Can route traffic between two MS/TP ports, one BACnet PTP (point-to-point) port, four (logical) BACnet IP ports, and one (logical) BACnet Ethernet port (BACnet IP and BACnet Ethernet are logical ports on the Ethernet physical port)
  • Supports BACnet IP foreign device registration and Broadcast Management Device (BBMD), supports PTP modem communications, and performs IP packet assembling/disassembling (PAD) routing for up to four BACnet IP PAD networks
  • Each of the four (logical) BACnet IP ports can be configured for BACnet IP, BBMD, foreign device registration, or PAD


I/O Expansion Capability

  • Up to seven CAN-A168EIO expansion modules can be added, each providing an additional 16 universal inputs and 8 universal outputs (for a maximum total of 128 inputs and 72 outputs)
  • I/O expansion modules are connected via standard shielded twisted-pair wire and can be installed up to 200 feet from the B-BC
  • Onboard and remote expansion I/O consolidates control of central mechanical plants, air handling units, and other equipment requiring single-point coordination and control of process loops


Other Features and Benefits

  • Email notifications of alarms and events via an external SMTP server
  • 16 universal inputs and 16 universal outputs onboard (expandable to 128 inputs and 72 outputs), software-selectable as analog or binary objects
  • High-performance 32-bit processor
  • Dynamic allocation of memory resources provides flexible use of scheduling, trending, and exception reporting in small- to medium-sized buildings without requiring a personal computer
  • Meets or exceeds the specifications in ANSI/ASHRAE BACnet Standard 135-2004 for BACnet Building Controllers
  • Up to 32 Control Basic custom program sequences for optimal control of a central plant, air handlers, and other connected equipment

 


The BAC-5831 is a native BACnet, fully programmable controller designed for general purpose applications. Use this versatile controller in stand-alone environments or networked to other BACnet devices. As part of a complete facilities management system, the BAC-5831 provides precise monitoring and control of connected points.

BAC-5831 controller provides precise monitoring and control of connected points.
The BAC-5831 is listed with the 9th edition of UL 864 (UUKL) for smoke control equipment. See the publications BACnet Smoke Control Manual and KMC Listed Smoke Control Devices and Support Documents Cross-Reference in the Documents section.

Highlights include:

  • BACnet MS/TP compliant
  • Automatically assigns the MAC address and the device instance
  • Controls room temperature, humidity, fans, monitors refrigeration, lighting, and other building automation functions.
  • Tested and listed by the BACnet Testing Laboratory 

 


Building AutomationThe BAC-5801 and BAC-5802 are native BACnet, fully programmable controllers designed for general purpose applications. Use these versatile controllers in stand-alone environments or networked to other BACnet devices. As part of a complete facilities management system, the BAC–5801 and BAC-5802 provide precise monitoring and control of connected points.

The BAC-5801 and BAC-5802 are listed with the 9th edition of UL 864 (UUKL) for smoke control equipment. See the publications BACnet Smoke Control Manual and KMC Listed Smoke Control Devices and Support Documents Cross-Reference in the Documents section.

Highlights include:

  • BACnet MS/TP compliant
  • Automatically assigns the MAC address and the device instance
  • Controls room temperature, humidity, fans, monitors refrigeration, lighting, and other building automation functions.
  • Tested and listed by the BACnet Testing Laboratory

  


The BAC-7000 series are native BACnet, direct digital controller designed for VAV terminal units. An integrated actuator and the supplied programs make them ideal controllers for temperature setback, overrides, proportional reheat and other HVAC sequences. Install these versatile controllers in stand-alone environments or networked to other BACnet devices. As part of a complete facilities management system, the BAC-7000 series provide precise monitoring and control of connected points.

Highlights include:

  • BACnet MS/TP compliant
  • Automatically assigns the MAC address and the device instance
  • Standard VAV control sequences are incorporated to provide pressure independent control of a single-duct VAV unit.
  • On-board airflow sensor for use with a single or multi-point differential pressure measuring station or pitot tube.
  • Use to control heating, cooling, cooling with heat change-over, cooling with time proportional reheat or three-stage, sequential reheat.
  • Tested and listed by the BACnet Testing Laboratory

 


The BAC-7300 series are native BACnet, fully programmable controllers designed for small air handler units, fan coil units, and roof top unit applications. Use these versatile controllers in stand-alone environments or networked to other BACnet devices. As part of a complete facilities management system, the BAC-7300 series controllers provide precise monitoring and control of connected points.

Highlights include:

  • BACnet MS/TP compliant
  • Automatically assigns the MAC address and the device instance
  • Supplied with programming sequences for small air handler unit
  • Controls room temperature, humidity, fans, monitors refrigeration, lighting, and other building automation functions
  • Controls fans, 2-stage heating, 2-stage cooling and an economizer
  • Tested and listed by the BACnet Testing Laboratory

  


Building AutomationThe BAC-7401 and BAC-7401C are native BACnet, fully programmable, controllers designed for heat pump unit applications. Use these versatile controllers in stand-alone environments or networked to other BACnet devices. As part of a complete facilities management system, the BAC-7401 and 7401C provide precise monitoring and control of connected points.

Highlights include:

  • BACnet MS/TP compliant
  • Automatically assigns the MAC address and the device instance
  • Supplied with programming sequences for heat pump units
  • Controls compressor, fan, reversing valve and optional auxiliary heating
  • Tested and listed by the BACnet Testing Laboratory