New Content Updates
Educational Webcast Alerts
Building Products/Technology Notices
Access Exclusive Member Content
Waterless No-Flush urinals resemble conventional fixtures, and easily replace them. They install to the regular urinal 2-inch (50MM) waste line (for 1-1/2-inch (38MM) waste lines, use a reducer bushing). They eliminate flush water supply lines. Flush valves are completely eliminated as well. No handles to touch, no sensors to install or adjust, no moving parts at all!
The urinal bowl surfaces are smooth and urine repellent; urine is 95% liquid and its drainage is effected without flush water through gravity. Daily cleaning procedures are the same as for flushed urinals, yet save time per urinal.
The conventional water-filled urinal trap is replaced by a disposable EcoTrap inserted in the urinal drain outlet of our urinals. It holds a layer of the proprietary immiscible BlueSeal liquid, floating on top of a urine layer. The combination of our EcoTrap and the covering BlueSeal blocks out sewer gases and urine odors from the restroom. A 3 ounce dose of BlueSeal lasts up to 1500 uses, replacing from 1000 and up to 4500 gallons of quality potable flush water at each fill!!
Note: The cleaning of Waterless urinals is effected the same way as cleaning conventional urinals. Replenishments of BlueSeal are simple and accurately measured with a PortionAid. Fill the PortionAid on top of the bottle by simply squeezing the bottle. Pour contents directly into the holes of the EcoTrap. The PortionAid minimizes the waste of BlueSeal.
BlueSeal is biodegradable and the EcoTrap is recyclable.
No special cleaners needed!