Readers Of This Article, Also View:
Be Prepared for Cold and Flu Season - Sponsored Learning

Firestone, click here...

New Era of Energy Efficiency: Windows

Part 1: Smart Windows Choices Include Low-E Glass, Electrochromic Glazing

Part 2: Don't Overlook Window Frames As Energy Savers

Part 3: Improved Window Performance A Challenge In Existing Buildings


Smart Windows Choices Include Low-E Glass, Electrochromic Glazing

By Loren Snyder - October 2012 - Windows & Exterior Walls


When facility managers select new windows, they're making a decision that will likely have an impact, not just for years, but for decades. Any shortcomings in windows selected will be felt for a long time in higher operating costs. And with the building energy consumption expected to climb 35 percent by 2025, according to the Department of Energy, poor window choices will exacerbate national concerns about carbon emissions and climate change. A range of window technologies, including low-e glass, smart windows and electrochromic glazing, gives facility managers options unavailable five to 10 years ago. These technologies target the two largest energy uses in commercial buildings — lighting and space conditioning. Some are best suited for new construction or window replacement, while others can improve the performance of existing buildings without the cost of replacing windows.

Window Technologies

Oldest of the "new" technologies, low-e glass uses an ultra-thin metal oxide coating to maximize performance. Although the coating itself is not visible, it limits solar heat gain while transmitting light. Depending on a facility's location, facility managers can choose low-e glass that admits more solar heat gain (in heating-dominated climates or for passive-solar use) or limits solar gain (for cooling-dominated climates). According to DOE, low-e windows generally cost 10 to 15 percent more than regular windows but can reduce energy loss by as much as 30 to 50 percent.

"Low-e technology provides a good and reliable means for improving insulating glass performance," says Michael Louis, a senior principal at the engineering firm Simpson Gumpertz & Heger.

A newer option is known as dynamic glazing. What it does is simple but dramatic: It changes color to control the amount of sunlight that enters a space.

In the most common type of dynamic glazing — electrochromic glazing — the presence or absence of electric current in the coating renders the window opacified or clear.

Electrochromic coatings are a nanometer-thick, multi-layer film, says Stephen Selkowitz, department head, building technologies, environmental energies technology division at Lawrence Berkeley National Laboratories. "Transparent conductors form the outer layers of the stack, an active electrochromic and passive counter-electrode layer form the middle layers, and an ion-conducting electrolyte layer forms the center portion of the stack," he says. The glazings can be manually or automatically controlled. The technology does have a small delay in most uses, from several seconds to several minutes.

Electrochromic technology relies on a network of wiring and controls that runs into and out of the glazing pockets of window (or curtain wall) assemblies. The installed system has to accommodate that network while maintaining weather-tightness for exterior applications. The network also has to be maintained once the building is in operation.

"[Electrochromic glazings] are new to the market and finding niche applications," says Ray McGowan, senior manager at the National Fenestration Rating Council. "This technology may realize market gains in the near future." Currently, many applications are for interior spaces.

One reason McGowan says he believes in the promise of dynamic glazing is because of its potential for solar heat control. "Dynamic glazing enables precise solar heat gain coefficient control to limit heat gain during high cooling periods and increase heat gain during heating periods," he says.

Another dynamic glazing option — thermochromic — relies not on electricity to determine opacity or translucence, but on solar radiation. This technology uses a tinted thermochromic layer that warms up and darkens in direct sunlight.




New Era of Energy Efficiency: Windows

Part 1: Smart Windows Choices Include Low-E Glass, Electrochromic Glazing

Part 2: Don't Overlook Window Frames As Energy Savers

Part 3: Improved Window Performance A Challenge In Existing Buildings


Comments


Browse Articles

On FacilitiesNet: windows, energy efficiency, window technology, facility management

FaciliyZone

Search for windows, energy efficiency, window technology, facility management articles on FacilityZone

Find us on Google+


QUICK Sign-up - Membership Includes:

New Content and Magazine Article Updates
Educational Webcast Alerts
Building Products/Technology Notices
Complete Library of Reports, Webcasts, Salary and Exclusive Member Content



click here for more member info.