KMC BACnet Controls from KMC Controls


The BAC-5831 is a native BACnet, fully programmable controller designed for general purpose applications. Use this versatile controller in stand-alone environments or networked to other BACnet devices. As part of a complete facilities management system, the BAC-5831 provides precise monitoring and control of connected points.

BAC-5831 controller provides precise monitoring and control of connected points.
The BAC-5831 is listed with the 9th edition of UL 864 (UUKL) for smoke control equipment. See the publications BACnet Smoke Control Manual and KMC Listed Smoke Control Devices and Support Documents Cross-Reference in the Documents section.

Highlights include: 

  • BACnet MS/TP compliant
  • Automatically assigns the MAC address and the device instance
  • Controls room temperature, humidity, fans, monitors refrigeration, lighting, and other building automation functions.
  • Tested and listed by the BACnet Testing Laboratory 

 


Building AutomationThe BAC-5801 and BAC-5802 are native BACnet, fully programmable controllers designed for general purpose applications. Use these versatile controllers in stand-alone environments or networked to other BACnet devices. As part of a complete facilities management system, the BAC–5801 and BAC-5802 provide precise monitoring and control of connected points.

The BAC-5801 and BAC-5802 are listed with the 9th edition of UL 864 (UUKL) for smoke control equipment. See the publications BACnet Smoke Control Manual and KMC Listed Smoke Control Devices and Support Documents Cross-Reference in the Documents section.

Highlights include:  

  • BACnet MS/TP compliant
  • Automatically assigns the MAC address and the device instance
  • Controls room temperature, humidity, fans, monitors refrigeration, lighting, and other building automation functions.
  • Tested and listed by the BACnet Testing Laboratory

 


The BAC-7000 series are native BACnet, direct digital controller designed for VAV terminal units. An integrated actuator and the supplied programs make them ideal controllers for temperature setback, overrides, proportional reheat and other HVAC sequences. Install these versatile controllers in stand-alone environments or networked to other BACnet devices. As part of a complete facilities management system, the BAC-7000 series provide precise monitoring and control of connected points.

Highlights include:  

  • BACnet MS/TP compliant
  • Automatically assigns the MAC address and the device instance
  • Standard VAV control sequences are incorporated to provide pressure independent control of a single-duct VAV unit.
  • On-board airflow sensor for use with a single or multi-point differential pressure measuring station or pitot tube.
  • Use to control heating, cooling, cooling with heat change-over, cooling with time proportional reheat or three-stage, sequential reheat.
  • Tested and listed by the BACnet Testing Laboratory 

 


The BAC-7300 series are native BACnet, fully programmable controllers designed for small air handler units, fan coil units, and roof top unit applications. Use these versatile controllers in stand-alone environments or networked to other BACnet devices. As part of a complete facilities management system, the BAC-7300 series controllers provide precise monitoring and control of connected points.

Highlights include:  

  • BACnet MS/TP compliant
  • Automatically assigns the MAC address and the device instance
  • Supplied with programming sequences for small air handler unit
  • Controls room temperature, humidity, fans, monitors refrigeration, lighting, and other building automation functions
  • Controls fans, 2-stage heating, 2-stage cooling and an economizer
  • Tested and listed by the BACnet Testing Laboratory

  


Building AutomationThe BAC-7401 and BAC-7401C are native BACnet, fully programmable, controllers designed for heat pump unit applications. Use these versatile controllers in stand-alone environments or networked to other BACnet devices. As part of a complete facilities management system, the BAC-7401 and 7401C provide precise monitoring and control of connected points.

Highlights include:

  • BACnet MS/TP compliant
  • Automatically assigns the MAC address and the device instance
  • Supplied with programming sequences for heat pump units
  • Controls compressor, fan, reversing valve and optional auxiliary heating
  • Tested and listed by the BACnet Testing Laboratory

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The Blue Book, click here



QUICK Sign-up - Membership Includes:

New Content and Magazine Article Updates
Educational Webcast Alerts
Building Products/Technology Notices
Complete Library of Reports, Webcasts, Salary and Exclusive Member Content



click here for more member info.